Guide To Windowdoctor: The Intermediate Guide On Windowdoctor

How to Have Your Windows Repaired and Still Enjoy Their Performance For Years to Come

Many homeowners are worried about the longevity of their window repairs. It is possible to fix windows and enjoy their performance for a long time.

Windows that are cloudy are caused by moisture in the spaces between the glass doctor panes. This can be resolved by cleaning the windows, removing the moisture and sealing them.

Foggy Windows

Foggy windows can make viewing outside your window difficult, and reduce the amount of natural light that can enter your home. The accumulation of moisture and water on the glass and cause wood frames and sills over time to begin to decay. If your window is constantly fogging up, it's likely due to condensation trapped in between the two panes of your window. Although this is a typical issue, it's certainly not something to ignore. The condensation of windows can cause mold, rot and mildew growth in the frame of your home, as well as an increase in energy efficiency.

Condensation happens when warm, moist air cools on an object that is cold. This shouldn't be a problem with your windows. If you have double-paned windows that are insulated, you should not have this issue unless the seal has broken. Foggy windows are an obvious indication of this issue. It is important to have them examined by a professional in order to determine if they are in need to be replaced.

There are a variety of DIY solutions that can assist you to deal with foggy windows. Many homeowners will recommend using a dehumidifier near the window to remove excess moisture. But this doesn't address the underlying issue, as the moisture will continue to build up between the window's panes, if the seal is broken.

Another method of dealing with a window that is foggy is drilling holes in the top and bottom of each pane. You'll then insert a desiccant, such as silica gel, into the holes to help absorb the moisture between the two panes of your window. Once the moisture has been eliminated then you must let the window completely dry before sealing the holes.

While these DIY methods are effective however, they're not a lasting solution and you'll likely see your windows be fogging up again in the future. In the end, a professional window replacement and installation service is your best option for restoring your windows to their original state. Contact a trusted window company today to find out more about how they can fix your windows and help you reduce the amount of humidity in your home.

Rotted Frames

Mold and mildew can create health problems for your family if wood rot is found around window sills or frames. People who are allergic to molds may experience itchy eyes and skin, wheezing, a stuffy nose, and breathing difficulties.

If the rot only affects only a small portion of the frame, you might be able repair it with wood filler epoxy. If the damage is significant or if decorative features like mouldings are interspersed with other parts of the window frame, it may be better to purchase replacement windows.

To find out the extent of rot on your window frame take a gentle probe with a putty knife or screwdriver. If you push into the rot and observe it is able to move easily, it's likely that the rot has gotten deep into the wood and will not be able to be corrected with a wood filler epoxy.

It is recommended to use wood that is the same type and moisture content as the windows around it to splice the replacement timber. This will ensure that the double glazing doctor splice will be robust and won't cause further problems in the future. If you are unsure about your ability to perform this job, it's always best to call in an expert.

Wood hardener is an common alternative to splicing fresh timber into the existing wooden frame. This is an effective way to stabilize the existing timber and prevent further problems with decay. This must be done as quickly as possible after the removal of the affected rotten timber so that the treatment can take effect.

If the rot is extensive and cannot be treated by a splice or a wood hardener, replacing the entire window might be necessary to prevent further damage to your home. It could be a larger cost upfront but it will pay off in the long run. You could also consider upgrading to windows that are more energy efficient.

Muntins & Mullions

While they look the same, muntins are distinct from Mullions. Understanding the distinctions between these two parts will allow homeowners to ensure that they're on the same page as their window installer.

Mullions are vertical elements that split a single piece of glass into two. In the past the mullions were required to hold smaller glass panes together to form larger areas of window glass. Today, mullions are used for decorative purposes, however they can also be included in double-glazed windows to mimic the appearance of multi-paned windows, without sacrificing efficiency.

Alternatively, muntins are narrow strips of wood that divide individual window glass into small panes. They can be used as a permanent feature or removable decorative accent. Muntins are made of wood or metal depending on their construction. They can be painted or stained to match the colors of windows. Muntins are usually the centerpiece of rooms in many homes. They give depth and character to a room that increases the visual dimension of a room.

Muntins, while mostly decorative but they also serve to increase security for your home. Because they are located between window units, a break-in will require breaking one of them and then removing another to gain entry. Muntins also help to keep dust and weather from entering homes as long as they are not damaged.

Few window companies make a big effort to differentiate between muntins, mullions, and the various kinds of mullions. This is why these terms are frequently used interchangeably and are colloquially called grilles. It's best to avoid this confusion, as it can be confusing to homeowners.

Modern windows do not require muntins or mullions even though they serve structural purposes. These window features are important for both functional and aesthetically pleasing windows. When selecting the best windows for your home, make certain to consider the architectural style of your property and the amount of maintenance you're willing to undertake. Select the window style that best reflects your needs.

Double-Pane Windows

Double-pane windows are known for their energy efficiency and insulation properties. A crack or break can reduce these benefits, leading to higher heating and cooling costs, condensation and water damage at your office or home.

Double pane windows comprise two glass sheets with an opening in between, which is typically filled with inert gases such as argon to block heat transfer and further insulate the window. However, if one of the panes begins to leak or crack, the gas will escape and your window will be less efficient.

If a double pane windows appears to be foggy or shows visible condensation, it is because the window seals are not working and allowing in humid air. This air can cause silica gel to swell and cause condensation to form in the window. A window that is at this point will likely need to be replaced.

Many homeowners are concerned about the cost of replacing their double-pane windows, but it's important to consider that replacement may be more economical in the long term. Repair services are more frequently required when a double-paned window is damaged or cracked or leaky than a new window. It also increases the risk of moisture intrusion, which can lead to mold and mildew growth, which could affect the health of your family.

Double-pane windows can also boost the value of a house which makes it more attractive to prospective buyers. Double-paned windows provide many additional advantages, including less noise pollution, lower costs for energy and a reduction in your monthly energy bill.

If you're unsure whether your window is a single-pane or double-pane one, put an item against the glass's exterior. If you only see one reflection, you have single pane windows. Two reflections indicates that the window is double-pane. A professional can evaluate the condition of your double-pane window and determine if it needs to be repaired or replaced. A qualified windowdoctor can often repair a double-pane window without replacing the entire unit which can save you time and money.