11 Ways To Totally Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance, you will need to source some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the window and the door is large, you might want to use a security screen that also includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window repair which is sagging. To accomplish this, you'll need to open the window to access the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close the window and then perform a test fit. The corners of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk is applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. They can be repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it's feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.