14 Common Misconceptions Concerning Fiat 500 Replacement Key Cost

fiat punto key replacement 500 Replacement Key Fob

It could be time to change the battery if your 500 remote key fob is not working. However, if you replace the battery and it continues to stop working then the issue is probably elsewhere.

At United Locksmith, we specialize in the creation of new keys for classic automobiles. We have the tools and components needed for this service.

Dead Coin Battery

A dead battery is the most frequent cause of your Fiat 500 keyfob not locking or unlocking the doors. The battery inside the key fob will drain quickly in the event that you don't use it often enough. If your remote started to show signs of weakening like a loss of range and then completely stopped working the battery could be dead.

The battery in the key fob is secured by metal clips that hold it in place. If the clips are not tightly secured, they could result in contact problems that will prevent your remote from receiving power. Using a small flathead screwdriver, pull the clip that holds the retaining pin open to take out the battery and then insert a fresh one. Be sure to use an identical replacement battery kind of voltage, size and specifications as the original battery.

The key fob can also be damaged or corroded due to exposure to water. Even a brief bath in soapy water can harm the electronic chip in. It's best to keep your key fob in a dry location.

Water Damage

If your key fob isn't functioning properly, it could be caused by water damage. Key fobs come with rubber seals to protect them from being damaged by light rain or a splash of water, but it is vital to keep your car keys away from the pool, ocean and the washing machine!

The key fob contains an electronic chip which sends an immobilizer of your car. The chip allows the 500 to start and lock. If it gets wet, however it will cease to function.

If you're looking to determine whether your key fob functioning it is possible to clean the internal electronics using isopropyl or an electronic cleaner. It is best to replace the key fob if it is submerged in salt water instead of trying to repair it yourself.

A replacement fob could cost you a little bit however, it's cheaper than having to have your Fiat 500 towed to a dealer and fixed there! You can also do it yourself with only a few steps. Make sure you have the correct type of battery prior to opening your keyfob. This task is much simpler than it appears and you can find step-bystep instructions online for almost any car key fob.

Faulty Chip

The chip in the key fob communicates with the immobiliser on your car to ensure that the vehicle will only start when right keys are in place. If the chip is damaged, or corrupted in any way your car will not start.

Damage to the water or a dead cell battery are the most frequently cited reasons for a faulty chip. It is best to delegate the task to a professional locksmith who will be able to replace the chip in a short time and at a a reasonable price.

If your key fob stops functioning after exposure to clean water from the tap or rain, take out the battery and clean the electronic component with a paper towel to ensure it's completely dry before putting it back in. If the key fob still doesn't work, it is likely a fried chip and must be replaced.

Some people will go to their dealer if they require an entirely new Fiat fob. However, this can be costly. United Locksmith is the best option for you if are looking to have your fiat 500 key fob replacement key fob repaired at a reasonable price. We have all the tools and knowledge required to repair your fiat replacement key cost fob in a professional and timely manner.

Faulty Receiver Module

Fiat key fobs send an electrical signal to the vehicle that can unlock and lock doors (and start the vehicle for those with an automatic transmission) up to 50 feet. However there are a few things that can cause the fob to stop functioning. This includes a dead coin-battery or water damage, worn-out buttons as well as a receiver issue. signal interference or an issue with the chip.

If the fob was in a pocket which has suffered severe trauma (such as being dropped on the floor, or washed in the washer) it might not be in a position to connect with the Body Control Module (BCM) of the vehicle. The BCM is a security device that can only accept signals from genuine keys.

If this is the case, then you will require replacing your fob. A professional locksmith is able to handle all aspects of the key replacement procedure, including programming a new one for your 500. In fact, they could provide you with a clone key that works just the same as your original fob (and costs only a fraction of the price).