17 Signs You Are Working With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues that include sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can also be due to the mechanism of the handle getting worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the problem the old caulking may require removal before a new layer can be put on. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with a breeze. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Verify that the upvc window repair near me hinges are open and closed in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to offer assistance.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, can be misaligned. Again, it's possible to just give them a clean but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be positioned on the windowsill on top. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it could be more cost-effective to replace them than to repair them. If you are having issues with your upvc windows, it is best to seek professional assistance immediately.