Twenty Myths About Double Glazed Window Repair: Busted
Double Glazed Window Repair
It's worth checking the warranty that comes with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms, in the first ten years.
A leak in the seal is typically the reason for mist to form between your glass windows. This should be fixed immediately to avoid mold or damp growing in your home.
Condensation Between the Windows
If condensation develops between the windows in your home, it is an indication that the seal holding the gas that insulates between the panes has failed. This is a serious issue that should be addressed promptly, especially in the winter months when humidity levels are at their highest. It could also cause damage to sills or sealants and also cause mould.
Ideally double-glazed windows shouldn't experience condensation between the panes. This could be caused by extreme humidity or a cold snap. Fortunately, this is usually fixable without replacing the entire window. A professional can drill small holes in the glass and then spray the inside of the window with a specially-formulated cleaning solution. The water is then removed from the window and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.
Condensation can also happen between the windows as a result of air leakage, or other causes outside the window. In this instance it can take a longer time for the moisture inside the window to accumulate, since the air must be sufficiently warm to vaporise the water molecules. In these situations it is recommended to replace the double-glazed windows rather than repair the seals on the existing units.
A double-glazed glass window comprised of two or more pieces of insulated tempered glass that are held together by a metal framework. The gap between the two of the window is filled with a non-toxic gas for insulation like argon or Krypton and then sealed tightly. The seal prevents the insulating gas from escaping and also preventing air and moisture from getting through the gap.
As the windows age, the seals will deteriorate and can allow moisture to leak into the gaps between the glass panes. When seals fail it is crucial to be aware of this since it means that the double glazing is no longer performing as efficiently as it did before. This could result in lower energy efficiency, higher heating costs, a damaged property and the risk of condensation between the windows.
Mist
It is perfectly normal to see condensation appear on your windows. This indicates that your double glazing system is operating correctly and is able to maintain heat in your house. The condensation happens because the air outside is warmer than the glass, and it reaches the dew point of the window earlier than the air inside. This is one of the great advantages of having high quality double glazing.
If you notice condensation on the inside of the window, it could indicate a ventilation issue within your home. This is because the extra moisture isn't going anywhere and is deposited on your windows as well as in carpets, on furniture and other areas around your home. It is possible to prevent this by having it inspected by a professional and making sure that there is plenty of fresh air in the house.
Another reason why you may have mist in your double-glazed window is that the seal between the two panes is breaking down. This could be due wear and wear or chemical cleaning solutions being employed. If this happens it is best to get the windows repaired in the shortest time possible.
Repairing your windows professionally will ensure that they are fog-free free of condensation, and free of misting. This is also much cheaper than replacing your windows and you will save money on your energy bill.
A FENSA registered window installer will provide you with a cost estimate for repair or replacement of your double glazed windows. Upgrade your windows to A-rated energy-efficient ones if they are very old.
It is a very good idea to keep copies of any warranties or agreements with your window fitters. This will be very useful if any problems with the windows develop in the future, and you can then contact your fitters to resolve the issue. This is a better option than simply not addressing the issue that will only get worse and could lead to other issues in your home.
The difficulty of opening or closing the door
It's not just a nuisance when double-glazed windows are difficult to open or close. They could also lead to more energy costs due to the loss of heat and draughts. It can also pose security risks, particularly when the locks aren't functioning properly. It is essential to fix any issues with double glazed windows and doors as soon as you discover them.
If you're unable to open your window and have tried the simplest solution like using a screwdriver to prise it open, or tapping the frame using a sharp object, the issue could be more serious. It could be that the window is sagging in its frame and needs to be reset or it could be that there is a gap between the glass panes and frames. In either case, consult a double-glazing repair upvc windows expert to ensure that the repairs are completed correctly and to prevent any further problems.
It's not uncommon for UPVC window handles and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. It usually happens due to the accumulation of dirt or grease inside the handle. This can be easily solved by cleaning it with a uPVC cleanser. If this doesn't work, try tapping the upvc window repairs near me using a screwdriver. Be careful not to damage either the handle or the window handle mechanism.
If this doesn't solve the problem, the window will need to be replaced because the hinges might not be in the correct position or the locking mechanism could have been damaged. In this situation, seek out a professional UPVC window repair expert.
David The Window Wizard is a specialist in double-glazed window and door repairs, including fixing double-glazed windows that have been shut or jammed. He has vast experience changing old window mechanisms to modern ones. This often can save you the cost of replacing the whole window. Call or email us now for more information or a no-cost quote.
Warping
Double-glazed windows are an excellent way to save energy in your home. They are made up of two separate panes which have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm air inside. In time, however windows can become damaged or broken and require repair. Fortunately, the majority of repairs are easy and can be accomplished without the expense of replacing the entire window.
One of the most common issues double-glazed windows face is warping. This occurs when windows begin to flex or twist, or bow. This can affect the structural integrity and insulation properties of the windows. The best way to avoid this issue is to make sure that your double-glazed windows are properly installed and maintained regularly.
If your double glazed windows are beginning to swell, it's essential to speak with a professional immediately to help prevent the issue from becoming worse. They will be able inspect your windows to pinpoint the reason. They will then employ special tools to fix the issue and ensure that your windows are sealed again.
A common cause for this issue is the presence of water vapour between the windows, which can build up over time. This can be caused a number of different factors like weather conditions, humidity and temperature variations. To fix this problem, the specialist will drill a tiny hole to let out moisture. The specialist will use a cleaning agent on the glass to cleanse it, then apply an adhesive.
If your windows aren't able to be shut or opened it could be due to a damaged mechanism or hinges. Before calling an expert to resolve the problem, it is worthwhile to grease the parts. This can usually fix the issue and decrease the need for replacements. If your windows are dated or do not provide the insulation you require, it may be better to replace them.
