Upvc Window Replacement Hinges: A Simple Definition

Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window hinges for replacement isn't as difficult as you might imagine. Make sure that the hinges' arrows are facing the correct direction and measure the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are many different kinds of hinges, each with its own unique features. This article will review the most commonly used kinds of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

These are a great choice to replace or upgrade your fire escape window since they open up to a full 90 degree angle. They can also be lowered to an easy clean position to allow you to easily reach the outside of your windows to clean them without climbing a ladder or lean over at angles that could be dangerous.

Yale is one of the most reputable and well-known brands in the home security industry. These hinges can be used with any type of uPVC side hung window. They can be moved to the easy-clean position by pressing in the small button and moving the window sash to one side. After closing, the window sash will return to its original position.

They are available in both 13mm and 17mm stack heights. Make use of our Egress Selection Guide to help you determine the best product for your window.

These hinges can be used with traditional side-hung frames made from uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the possibility of an accidental closure during high winds. They have been tested for over 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

There are no buttons or catches The Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution to emergency egress as well as safe cleaning. First, open the bi-fold door hinges to the egress (full opening) position, and then press the hinge retaining clip on the inside of the bottom corner. This will release both the catches on the top and bottom allowing you slide the sash to the clean position. Once it is in the easy-clean position, close the window to reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also called "Easy Clean") are used to replace windows with side openings to ensure fire safety. These types of hinges open more wide and faster than standard hinges to allow an expansive clear opening for escape in the event of an incident of fire. This kind of hinge is required in any living space with a window as stipulated by building regulations.

They feature an exclusive friction stay that opens the window to 90 degrees and allows the opening sash to slide across when it is open to allow easy cleaning of the exterior side of the glass without having to use ladders. The hinges do not have buttons or catches and operate with an easy, secure lever that is accessible from the inside of your home.

The hinges are manufactured in the UK by Cotswold and come with a child safety limiter for use throughout the day that can be reverted with a hidden button giving you peace of mind that your children will not accidentally open the window too far. The stack heights are 13mm or 17mm.

To purchase these hinges, take a measurement of the length of your existing side hung window hinge that fixes to the frame (see the guide on measuring your upvc window hinges replacement window hinges). Select the proper size hinge from the choices below.

Please note that the measurement is taken from the part that fixes to the frame not the sash. The real hinge length may be slightly longer or shorter depending on the manufacturing process of your old windows. When deciding the size of the hinge, most upvc frames will fit a stack height of 13mm however if your original window frame measures 17mm, choose this option. You can also opt for the 4mm packer to compensate for the difference. All the hinges are supplied in pairs (1 left and 1 right). Screws are not included in the hinges. They can be purchased separately if needed. Our window repair screws made of upvc are recommended. These screws are designed to improve your hinges' performance and allow them work effortlessly for a longer. They come with a lower friction design and a heightened weather seal with caps made of nylon.

Restricted Hinge

There are occasions when windows must fully open and this can be a problem using the standard hinge. These child safety hinges can help overcome this issue and offer a fantastic solution when ventilation is needed but access for cleaning or escape in case of fire is not feasible. They function by limiting the amount the sash can open and allowing the control of this limitation with an option. They can be used for side and top-hung windows and are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinges blend the features of both the standard restrictor, as well as an escape pivot to provide a simple and effective way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It is available in a pair, with one hinge being the restricted egress, and the other being the unrestricted. This permits one hinge to be installed at the bottom and the other is installed at the top.

These uPVC hinges are restrictive and have been tested to BS6375 part 2 and are designed to be used on windows that isn't able to be fully opened, like a small children's bedroom. The mechanism limits the extent to which the sash can open up to the safety level of 100mm and then re-engages when the window is closed.

Like the other types of uPVC friction hinges that are available, these hinges can be used on all styles of windows and are suitable for difficult to access windows above ground level three-storey flats, or those that typically require a ladder to reach them. They can be improved by our security enhancements, such as hinge guard protection plate or dog bolts, to achieve PAS 24 performance.

It is important to measure the hinges on your window to ensure that you get replacements of the same size. The easiest way to accomplish this is by looking at the hinge in the image gallery and working out the location you would like it to be positioned. Top hung hinges are restricted on both sides, while side-hung hinges are only restricted on one side.

Standard Hinge

A standard double glazing hinge repairs has metal-to-metal contacts and has no additional parts to decrease friction. It is available in a variety of finishes, and is fire-rated. For a quick way to determine the radius of your hinge, lay it flat and then line up the quarter and dime in two corners. If the dime is more snug and the corner is round by 1/4 inch. If the quarter fit better, it's rounded to 5/8 inch.

The right hinge can be the difference between making or breaking the appearance of your door. It's crucial to match the style and finish of your door to the hinges to create a unified design that is both functional and visually appealing.