15 Of The Best Pinterest Boards All Time About Suzuki Ignis Key

How to Unstick a Suzuki Ignis Key

suzuki motorcycle key replacement's funky and affordable city car is getting a midlife refresh. It's not a hot hatch, but it eats up dirt roads in rural and urban areas with gusto, while its handy turning circle makes town centre driving easy.

The new model comes with smart driver assistance and safety tech - including lane departure warning and a drowsiness alert that is a welcome addition to long drives.

Steering Lock

The steering lock is a security feature that stops your Ignis from being stolen while in gear. It's a vital safety measure, but it can be frustrating when you need to go somewhere and you can't unlock the wheel. There are a few simple actions you can take to fix the issue.

Check first that the ignition switch is set to "on". If you're sure, try turning the key in the direction you were turning before the wheel was locked. It's a bit difficult, but in most cases it is enough to unlock the wheels.

If the wheel doesn't unlock You can spray a small amount of canned air into the ignition cylinder in order to lubricate it. Wear eye protection to prevent getting the canned air in your eyes. Liquid graphite may also work to lubricate the cylinder.

If none of these solutions work then you'll need to replace the ignition assembly. This component is easily found in any auto parts shop. Just ensure you buy an identical replacement suzuki key and then compare it with your old one before you attempt to install it. Take off the cover from the ignition to reveal the part.

Worn

The steering lock could cause the ignition switch to get stuck. This is a safety feature that prevents your Ignis from spinning away while the engine is running. If this happens it is possible to unbind the steering wheel by manipulating it.

In time, the Ignis keys can wear out and become difficult to turn. It may not happen as often as a defective switch, but it does happen. If this is the case, you should replace your key.

Also, see if there is anything obstructing your Ignis key from entering the ignition cylinder. There can be debris or dirt which can become stuck inside the ignition cylinder and block it from turning.

Finally, you should try a little grease to see if it aids. You can find a wide range of lubricants at your garage or at a local auto parts store.

A silicon "glow-in-the-dark" key cover is another option. These covers absorb light and then release it when the weather is murky or darker. They also protect your keys from wear and tear. They are available for a majority of suzuki key code models, and are available on the internet or at a local suzuki replacement key swift key fob programming [Gstd blog article] dealership.

Bent

A key may become bent over time. This could cause the teeth of the key to not engage with the lock cylinder in the same manner and stop the key from turning the ignition. In this scenario it is necessary to replace the key. If you have a spare key, it's best to have it duplicated and keep it in a safe spot.

Another possible cause is the cylinder that controls ignition can wear out. The lock pins inside may get stuck or stuck together and prevent the key from being able to go completely into or out of the ignition cylinder. This can be fixed by replacing the cylinder, but it is best to replace the cylinder before the key becomes stuck in the ignition.

If your Ignis keys are still stuck, even after you've tried the simpler fixes It could be time to grease the cylinder. Graphite powder or liquid graphite could aid in moving the lock pins more freely, and also free your key. It is available in a majority of auto parts shops. When applying the lubricant, ensure that your Ignis is in park and do not attempt to pull it out of its bind it. This could lead you to more serious problems.

Broken

If you've tried everything else to remove a key but it's still stuck the key, your final option is to try a fluid. You can buy some of this from your local auto parts store and apply it to the inside of the cylinder in the ignition lock using a cotton ball or rag. Try again. Move the key backwards and forwards gently to spread the fluid. If you're able to massage it forward, do it but don't force it too much or you could break it off inside the cylinder.

The key's internal circuitry may be unable to function due to age and use. This isn't nearly as common and typically means that you'll have to have the key duplicated and replaced with an entirely new one.

The case of your suzuki keys keyfob could also get damaged or worn. This is especially common especially if you're using an imitation key fob that has a plastic or rubber shell. Depending on the situation, The Key Crew can sometimes change the internal circuitry of your old key fob into an alternative shell case, avoiding the need to purchase a completely new key fob. We'll let you know if this is an option for your particular situation when we call you to schedule the service.