A Step-By-Step Guide For Choosing Your Saab Keys

Making Your Own Replacement Key For Saab 93 Viggen

Saab owners who lose a key may be worried about the expense and inconvenience of replacing it. You can reduce these expenses by making your own key fob.

To do this, you will need an screwdriver with a flat head. Place the screwdriver in the slot that is located in the middle of the case, and slowly work it open.

Cost

The majority of SAABs have two keys when they're new, but some used cars only have one. In this instance the owner has to purchase a new key, and this can be expensive. There are a variety of ways to save on this process. If you are only looking to replace the key fob case and not the emergency key or badge it is possible to save money by purchasing a used case from a dealership. These cases do not have the emergency badge or key, and they are prone to wear out fast.

In addition to the cost of buying a new key, you will also need to pay for the installation and programming of the TWICE module. These costs can quickly become expensive particularly if you have no spare key.

It is important to always have two keys for your vehicle. This way, in the event that you lose the only working key, you won't be stuck without transportation.

It's not as hard as it appears to add an additional saab key fob repair 9-3 key. The only major problem with this is that the key needs to be linked to your car's computer. This can be done by an authorized dealer, but it may take some time to set up an appointment. You will find all the information you need on the internet to help you through the procedure.

Installation

The majority of Saab cars built since 1995 have an immobilizer system that uses a key-fob to control the engine of the car. The system also controls door locks and remote functions of the car. It is essential to have a spare key available to ensure that you don't lose the original and causing your car to be stolen. The positive side is that if you lose your only functioning saab key code key you can replace it without having to pay for the expense of a dealer service.

It is necessary to prepare the new keyfob. It is done by using a flathead screwdriver to pry the case open. Simply place the screwdriver in a small hole in the middle of the case. Then gently work it. If you're having trouble, try using different angles. After you've opened up the case, you're able to take out the electronics and place them in a new fob case.

Once you have the replacement fob as well as the key, you are able to begin the programming process. You'll be required to connect your Tech2 and follow the directions for the NG 9-3 (with or without a key). It is recommended to purchase a replacement unit that is coupled to the correct key and transponder. You can locate the unit online however, make sure that the replacement is an OEM part.

Programming

A Tech 2 is required to add a second key to the Saab 9-3. This also requires programming the vehicle to recognize the new keys. This is a far more complex procedure than simply copying a metal key. It should be handled by professionals to avoid damaging the electronic system of the vehicle. If you're thinking about adding a spare key for your vehicle, it's best to get it done as soon as you can. The delay could lead to higher costs in the future.

In addition to adding a replacement saab key key, you'll have to replace the TWICE or CIM module. This is usually a mail-order procedure and not something that you can do with an aftermarket provider. The cost of purchasing a new automobile can be expensive depending on the car model.

The dealer will charge the highest dollar for replacing the car computer, but you have another option! S.A. Locksmith & Security can RE-Program the EEPROM in your Saab computer and prepare the vehicle for the new key, saving you the expense of a brand-new car computer! This service is quick, simple and inexpensive. It could save you 50% or more compared to what a dealer would charge you! This is a great solution for those who have lost their car keys.

Remotes

The Saab 9-3 Viggen is among the most unique cars ever to sport the Saab badge. It was a Scandinavian, front-drive fighter jet-inspired beast that was incredibly fast and fun to drive. Although plenty of other saab 93 replacement key models were built after it, few were as unique.

If you own a Saab 9-3 and lose your key fob, it's important to replace it as fast as you can. Saab vehicles come with an immobilizer feature, which requires a unique key for starting. If you have a spare key, the process of replacing it is easy. But if you don't, it can be costly and time-consuming.

You can save money by buying a used replacement key fob and having it programmed by a local locksmith. Be cautious when buying used keys from eBay and other online outlets. They may not be authentic and you may pay more in the end.

Removing the electronics and battery from the old key fob is an easy procedure that anyone can complete using a screwdriver with a small flathead. Be careful not to scratch any of the small electronic components inside the case. It is also important to be careful not to pour liquids onto the interior of the case as it may cause damage. It is also recommended to avoid buying duplicate keys from aftermarket sellers, since they might not have been linked to the CIM of the car you own.