It s The Myths And Facts Behind Saab 9-3 Key Replacement

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add another key. It requires dealer service with a handheld computer dubbed Tech-2. Then a new car key and transponder need to be bought and then programmed to the car.

Rotate your keys to prevent one from wearing out more than the other. This will also ensure that your keys remain in good condition.

Replacement Case

Unlike the classic Saab keys of old, the new key fobs are equipped with electronics that make it difficult to duplicate. This has made stealing cars a lot more difficult than it was a few years ago. However, it has also made replacing lost keys a comparatively expensive task.

Saab 9-3 owners should have two working keys. It's expensive to replace a lost key because it requires replacing the CIM module, as well as programming the locking cylinders. Dealers usually charge between $100-$200 to complete this.

There are options to avoid these high costs. Some parts suppliers will search for the code on an old key (usually the same one that opens the doors and switches the ignition) and cut a new key blade from metal for less than the dealer's cost. The key must be exactly the same as the original to allow it to function in your vehicle.

Follow these steps to replace the case. You'll require an open-faced screwdriver and patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. When the case is opened take the electronics out and place them into the new case. Make sure you insert the correct key and badge back inside the case, too.

replacement saab key Battery

The Saab 9-3 replacement battery is a low-cost part that can be easily and quickly replaced. The YouTube video of Cyclone Cyd shows how to replace the remote fob battery in just four simple steps. This tutorial should work for any modern saab 93 replacement key key fob however, the procedure may differ slightly.

The first step is to locate the button that releases the backup key within the fob. This button is usually on the back of your fob just below the saab 9-3 key fob replacement, Kemu officially announced, Logo. Use a flathead to insert the screwdriver into the small hole in this button. This should be enough to open the case of the fob to allow you to replace the battery.

Once the new CR1632 battery is in place then you can reassemble your remote key fob and program it to your car. The whole process should not be more than an hour. It's a simple process that doesn't require any special tools.

If you lose your key, the process is a bit more involved however it can be done. The dealer will first need to read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they will have to cut the new key and then program it with a new software tool called MDI.

Replacement Key Fob

The key fob contains batteries that are used to lock and unlock your car. Batteries have a limited lifespan and eventually die. This is a problem that happens to all cars and the good news is that you can change the batteries in a majority of key fobs and not have to replace the entire case. You can purchase fobs replacements on Amazon that have all the electronics already installed, which means you can simply open the case and replace the old batteries. It is important to keep in mind that you will need to remove the emergency key first, and you can do this by putting an incredibly small screwdriver with a flat head into the slot located in the middle of the case. Move the screwdriver around the case until it is split open, making it easier to remove.

If you're about to replace the keys, ensure that you have spare keys, because this can cut down the total cost by a significant amount. If you have an extra key, you can request the dealer to cut it in half and program it to your car. This is much cheaper than purchasing a new fob.

If you don't have a spare car key, you can add another key to your car, but this requires a lot of research and effort. A second key can cost around a hundred dollars and also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

In contrast to earlier Saab automobiles, the current saab key fob replacement 9-3 models have an extremely sophisticated alarm system that is dependent on a coded keys. If you lose your primary key, it could be costly to purchase a new one, as the car has to be equipped with a specific computer and also be programmed to accept a brand new key. The majority of locksmiths aren't able to do this and even a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you the highest price to replace your car computer (also called the CIM or SAAB twice) If you lose the only working key. We can reprogram the EEPROM of your car's computer so that it's ready for an additional key. This will save you more than 50% on the cost you would have to pay a dealer.

If you've been a faithful owner of a 03-11 saab spare key 9-3, you likely know that the ignition key isn't all that durable. If your ignition key is not functioning properly, it is time to think about replacing it. They can become very sticky and the buttons are known to fall off. Luckily, replacing the ignition key isn't as complicated as it sounds and is fairly easy to do using the proper tools.