Nine Things That Your Parent Teach You About Repair Patio Door Lock
How to Repair a Bad Patio Door Lock
A secure patio door is an essential part of home security. If your door is difficult to lock, it can be a nightmare.
In a lot of instances, a locked that is not working is caused by the wrong alignment or just wear and tear. Lubricating the lock, or adjusting its position may aid in restoring its functionality. If these solutions aren't working, you can replace the mortise lock and handle.
Clean and Lubricate
A door lock may become difficult to open and close because of dust, dirt and grime. Regular cleaning and lubrication could aid in preventing your security device from becoming stiff or stuck. This will help you save money on Repair patio door lock bills and extend the life of your door.
To begin, you will have to clean the lock's the cylinder. Make use of WD-40 or another penetrating spray to accomplish this. Spray a small amount of it into the keyhole and then move the key into and out to distribute the oil. Avoid using household solvents or other oils that can damage your locks. Also, make sure to spray a bit on the key itself as well.
After cleaning your lock's cylinder, it's time to lubricate. You can apply a silicone spray or a dry lubricant like graphite powder. Graphite powder is long-lasting and doesn't swell up like liquid lubricants do, which is why it's a great choice to lubricate locks that are sticky. Silicone sprays can endure temperatures of minus 0 degrees and are impervious to water. However, they might need multiple coats in order to be efficient.
You can also apply sprays for de-icing, which is specifically designed for cold weather and will loosen ice and frost from the lock mechanism. A few coats of this will help your lock to unlock and then lock again easily.
How often you have to lubricate your locks will rely on environmental factors. A coastal location exposes your door to salty air and cause corrosion, and temperature variations can affect the performance of your lock. The most common rule of thumb is to grease your locks twice per year, or more frequently if you reside in an area that experiences extreme weather conditions. Lubricating your locks will save you money on repairs and ensure your patio door continues to perform as it should for the years to come.
Reposition the Lock Cylinder
If your patio door lock repairs near me door lock doesn't perform as it should, one or more of its parts may be damaged or misaligned. Regular inspection and timely repair of a defective patio door frame repair door lock can avoid any further damage and ensure your doors are safe. You can repair doors that are locked or unlocked by tightening loose screws, adjusting the lock mechanism, or replacing the lock cylinder.
Start by examining the exterior and interior of the lock for indications of damage or misalignment. Locks for patio doors can expand or contract in response to the weather, and they might even shift with time. This slight movement can cause the locking mechanism to misalign and cause problems when closing or opening the door.
Then, check the lock cylinder for obstructions in the keyway hole. A damaged or corroded lock cylinder could be difficult to access, and may cause damage to the latch springs, cam or the lock pins. If the cylinder does not fit easily, you can clear any obstructions by using a pair of tweezers and a picklock. If the issue persists, you may need to take the cylinder out and disassemble it in order to identify the source of the obstruction.
If the lock cylinder is not been screwed to the body of the lock, it can be loosen by unscrewing the screw on the faceplate of cylinder. Unscrewing this screw will allow you to rotate the cylinder and could help to restore alignment.
Check the cylinder for a little tab that can move up and down using the key, generally towards the end. This tiny clip, referred to as a "release tab" prevents the cylinder from sliding all the way into the lock body. A standard key will slide this tab back to let the cylinder out and allow it to be removed and then reinserted.
If the lock cylinder of yours is stuck, you may be able to restore proper alignment by rotating it until the latch bolt connects with the strike plate and the handle or knob can be pushed into and pulled out. Reassemble the lock once you have restored alignment. Test it to see if it works. If your patio door lock isn't working properly It is likely that a different component, such as the latch or latch spring requires replacement.
Tighten the Screws
Over time, the use of regular, hot and cold weather dust, dirt, and can wear down patio door locks. These delicate components can be damaged if not properly maintained, causing your door to not lock properly. Most lock problems are easily solved with just a few steps.
Clean the lock mechanism. Use a damp cloth remove any dirt or dust that might be present, and then dry the parts thoroughly. After cleaning, a small amount of silicone-based lubricant can help keep the moving parts operating smoothly and efficiently. Avoid lubricants with oil bases,, as these can attract dust and debris that can lead to further issues.
If your upvc patio door repairs near me door comes with a security footlock, ensure that the footlock is aligned correctly with the strike plate. In most instances, this will require adjusting the screws that secure the foot lock to the frame of your patio door. Loosen the screw using the Robertson screwdriver, and gently pry upwards or downwards to adjust the foot lock if needed. After the adjustment is completed then tighten the screw.
The most common problem when it comes to repairing local patio door repairs door handles is misalignment of the strike plate and latch. This can be caused by wear and tear, or the latch could be placed lower or higher than it should be.
Start by removing the handle, then find the bolts or screws that secure it. Keep track of the screws or bolts, since you'll need them for the installation of the new handle. Then, you can remove the old spindle, and then slide the new spindle into position on the inside of the door, making sure that it is in alignment with the holes in the interior and exterior handles. Reinstall the interior and external handles after the spindle has been installed. Make sure they are properly aligned with the bolts or screws that hold them in place.
Close and lock the patio door once you have made any necessary adjustments. If the door is correctly aligned, it should open and close smoothly without the need for any additional force. If you still have problems you may have to move your strike plate or latch or replace the lock cylinder.
Replace the Latch
If your patio door locks still don't work, it may be time to replace the latch. Most homeowners can replace locks themselves. Begin by sliding the patio doors all the way out and removing the existing lock on the interior of the door. Carefully study how the existing lock is screwed into both the door and the jamb to discern the kind of lock you'll have to purchase.
Before you install the new latch, loosen the screws securing the strike plate (the part of the lock that's mounted on the outside edge of the door frame) and adjust it either horizontally or vertically to align it with the latch hole in the jamb of the door. After you've adjusted the latch plate you can tighten the screws, then screw it into place.
After all components have been repositioned or changed then assemble and secure the patio door according to the instructions of the manufacturer. After you're done, test the latch to make sure that it fits and is able to catch the latch's hasp when your door is closed. If it does the lock will be able to latch onto the door. If it does, your patio door track repair door lock is functioning as it should and will give you the security and privacy you've come to expect from your doors.
Like other parts of your home your patio doors also need to be properly aligned for they to function effectively. Over time, cold and hot weather dirt and debris and other factors can cause the hinges, door frame, and the locking mechanism to shift. If these components are not aligned it's similar to trying to insert a key into the wrong keyhole: It just doesn't work. By following these easy steps, you will be able to fix the issue that may have been thought to be impossible to fix. You should pat yourself on your back for tackling the project and reclaiming the patio door's closed position! We're betting you won't experience any problems opening or closing your patio door. Good luck! We're here to help if you have any questions or concerns.
