What Is Saab 9-3 Key Replacement And How To Utilize It

How To Get A Saab Replacement Key to Replace the Replacement Key Battery For the saab spare key 9-3

Saab owners have a unique procedure to add a second key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then the transponder is replaced and a key must be purchased.

It is a good idea to rotate your keys in order that one does not get worn out more quickly than the other. This will also help to keep your keys in pristine condition.

Replacement Case

Contrary to the classic Saab keys of old keys, the modern key fobs have electronics inside which makes it more difficult to copy. This has made car theft significantly more difficult than it was twenty years ago. It also makes it more costly to replace keys that were lost.

Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. It is costly to replace a lost or damaged key since it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers usually charge between $100-$200 for this.

There are ways to reduce the high cost. Some parts providers will look up the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade out of metal for just a fraction of dealer cost. The key must be exactly the same as the original for it to function in your vehicle.

You can also change the case yourself by following these steps. You'll require a flathead screwdriver along with some patience. Utilizing the screwdriver, slowly tear the plastic away and separate the emergency key from the case. When the case is opened, remove all electronics and put them back in the new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the saab replacement key 9-3 is an inexpensive part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four steps. This guide should work with any modern saab key programming-type key fob, although the process might differ slightly.

This button is usually located next to the Saab logo on the back of the fob. It is usually located near the Saab logo on the back of the fob. Then use a flathead screwdriver to insert into the tiny hole in this button. This should be enough to open the fob's case so that you can replace the battery.

After the new battery CR1632 is installed You can then reassemble the remote key fob and program it to your car. The whole process should take more than a half hour at the most. It is a simple process that does not require any special tools.

The process is a bit more complicated in the event that you lose your key, but still possible. The dealer will have to read the car's VIN and then order a new key blade and TWICE module with the correct unique code. The dealer will then need to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it's got an internal battery. They have a limited life span and will eventually fail. This is a regular issue that occurs with all vehicles and the good news is that you can change the batteries in a majority of key fobs and not have to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. You can simply remove the case and replace the batteries. It is important to note that you'll have to take out the emergency key first, and you can do this by putting the screwdriver of a small flathead into the slot located in the middle of the case. Move the screwdriver around the case, and it should split open, making it easy to remove.

If you're looking to replace your keys, keep a spare available. This can save you a lot of money. If you have a spare, you can ask the dealer to cut a new key and program it to your car, which is cheaper than replacing the whole key fob.

It is possible to add a second key to your vehicle even if you don't have one, however it requires an extensive amount of research and effort. It costs a few hundred bucks to add a second car key. The computer in the car must also be programmed. This can be done by a professional, however it's an expensive option for most owners.

Replacement Ignition

The current SAAB 9-3 features an alarm system that is more sophisticated based on a key code. If you lose only one key, it may be costly to get another one since the car must have a specific computer installed and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program an entirely new key, if they are unable to complete the task.

Dealers will charge you the highest price to replace your car computer (also called the CIM or SAAB twice) If you lose your sole working key. We can reprogram the existing EEPROM on your car's computer to be ready to accept an additional key. This will save you more than 50% off the cost you would spend at the dealer.

If you have owned a car like the SAAB 9-3 for a long time you are aware that the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to be removed from them occasionally which is why you should think about buying a new one if the one you have isn't working properly. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done in a short time with the proper tools.