Why Saab 9-3 Key Replacement Is Tougher Than You Imagine

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then, a new transponder and key have to be purchased.

It is recommended to rotate your keys in order that one doesn't wear out faster than the other. This will help to keep your keys in perfect condition.

Replacement Case

Contrary to the classic Saab keys of the past keys, the latest keys have electronic components which makes it hard to make a copy. This has made car theft significantly more difficult than 20 years ago. However, it has also made replacing lost keys a more expensive undertaking.

Saab 9-3 owners must have two working keys. If one of them is lost, it costs a fortune to get another one for the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are options to avoid these high costs. Some parts providers can look up the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade at just a fraction of dealer cost. The key must be exactly the same as the original to allow it to work in your vehicle.

You can also replace the case yourself by following these steps. You will need an flathead screwdriver and patience. With the screwdriver, pry off the plastic and then remove the emergency key. After the case is open, remove all electronics and place them in the new case. Put the correct key and badge inside the case.

Replacement Battery

The replacement battery for the saab 9-3 key 9-3 is an inexpensive component that can be replaced easily and quickly. This video tutorial on DIY from YouTube Cyclone Cyd will show you how to replace the battery of the remote key fob in only four steps. This tutorial should work for any modern saab key fob however, the procedure may differ slightly.

This button is usually placed close to the Saab logo on the back of the fob. This button is usually on the back of your fob, close to the saab key programming near me Logo. Then take the flathead screwdriver to insert into the small hole inside this button. This should be sufficient to let the fob case open so that you can change the battery.

After you have installed the new CR1632 batteries, you can restore your remote key fob. You can then program it into your car. The entire process should not take more than a half hour at the most. This is a very easy process that doesn't require any special tools.

The process can be a bit more complex if you lose the key, but it's possible. The dealer has to first verify the VIN of the vehicle and order a replacement TWICE module and key blade with the proper unique code. Then, they'll be required to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is a device that locks and unlocks your car. It is equipped with batteries inside. The batteries last for a period of that is a long time, and they eventually fail. This is a common problem that happens with all cars, and the good news is that you can change the batteries on most key fobs without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. You can simply open the case and replace the batteries. It is important to remember that you'll need take out the emergency key first, and you can do this by putting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it easy to remove.

If you're ready to replace your keys, have a spare available. This will save you a significant amount of money. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is less expensive than purchasing a new key fob.

It is possible to add a second key to your vehicle in the event that you don't have one, but it requires some research and effort. Adding a second key costs a few hundred dollars, and it requires programming of the car's computer. Professionals can do this however it's a costly option.

Replacement Ignition

In contrast to the earlier saab replacement key vehicles, the latest SAAB 9-3 models feature an upgraded alarm system that is built on a key code. This means that should you lose only one functioning key, getting an additional one could be extremely expensive since the car has to have a unique computer module fitted and also must be specially programmed to accept a new key. Even a dealer can charge hundreds of dollars to program the new key when they are not able to do it.

Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) If you lose the only working key. We can reprogramme the existing EEPROM in your car computer so that it's ready for an extra key. This will save you more than 50% of the cost you would pay at an auto dealer.

If you've been an owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't all that durable. If your ignition key is not working correctly, you should look into replacing it. They can become very sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished quickly.