Your Family Will Be Grateful For Having This Ghost Immobiliser Problems

Protect Your Pride And Joy With The lamborghini ghost installer Immobiliser

Ghost Immobiliser can safeguard your valuable property from theft. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses. This will then allow your vehicle to begin.

Simple PIN code change process

With the rising rate of vehicle theft, many owners are looking to upgrade their security. There are many kinds of aftermarket security devices that range from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system can help you locate your vehicle if it's stolen, but it will not stop the crime. Immobilisers, on the contrary is exactly what says on the tin: it disables the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your car.

Utilizing the buttons already in your car, the ghost device creates a unique sequence which must be entered prior to the engine will start. This can be done via the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This is a great solution if you want to give your car to valet parking or for maintenance. The immobiliser remains in operation.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons on your vehicle rather than being a standalone device. This means it's not just a highly effective protection against theft of your vehicle, but it can also be transferred over to any future cars you own, making it much more valuable than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key cloning and hacking. It also blocks ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices that are the most common method used by thieves to get around existing immobilisers.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console or doors, to create a unique disarming sequence. The sequence can be extended up to 20 presses for additional security. The iPhone app is limited to one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is secured.

The ghost installations review also prevents car thieves from using a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start if a valid PIN code has been entered. It is able to be operated temporarily in the Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) which means you can hand your car to an attendant or valet without entering an entry code.

Every vehicle is tested

The Autowatch porsche 911 ghost installer is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to prevent your car from operating normally until you enter a customized code. The system can be activated or deactivated via your smartphone's app without the need for additional wires.

The standard factory immobilisers work with a transponder which is embedded in the key. It transmits a message to the ECU. If the correct code is transmitted the car will start, but if a transponder is replaced with one from another vehicle the immobiliser will not recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your car away could a thief take it away, and they would still not be able drive it.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the door panels, to generate unique PIN codes that needs to be entered to use your car. This is done without any additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

porsche 911 ghost installer 2 immobiliser near me (yu-ivey-2.thoughtlanes.net) is more difficult to get rid of than car alarms, which require disarming with the buttons. This makes it a great complement to a GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to go far on social media to find stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the car without your original keys.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It works by creating an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the centre console. This unique PIN is entered alongside the original key fob to stop the engine from beginning. The unique override pin is found on a black card that you receive following your installation. It is easy to remember since there are no LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can tell the security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike most other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker with these systems, but this has to be specified before installing the device. They are also service/valet-mode compatible and a good alternative to a tracker if you are you have your car checked for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent times, there has been a increase in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to steal your prized possessions. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been hijacked.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent, since it doesn't use radio frequencies or key fobs. This means it isn't detected by diagnostics or other vehicle hacking devices. It also prevents you from adding a new ECU or key to bypass the system, since only the PIN code allows the engine to start.

The device is hidden in your car and is reached via the buttons on your steering wheel, centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits must be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being moved away or even started without a PIN code being entered first. If you are driving away with the device in motion, an indicator will appear on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN at this time, the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.